The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Instruments v / [CA] [CA11] ITC-5 Problem?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] ITC-5 Problem?
07-30-19, 09:16 AM (This post was last modified: 08-02-19 09:54 AM by Chuck - Raymarine - Moderator.)
Post: #1
mal5033 Offline
Junior Member
**
 		Posts: 1
Joined: Jul 2019
Reputation: 0
[CA11] ITC-5 Problem?
I recently installed a Raymarine i70s and connected my existing B&G wind and depth transducers (which were previously working fine). I have noticed that the depth goes to dashes at about 105 ft and stays that way until the water is more shallow. Also, about half of the time the wind direction goes away (only when the depth malfunctions).

I plan to open the pod and reconnect the wires. I am assuming this could be a power issue.

Are there any other suggestions?

Thanks
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] ITC-5 Problem? - mal5033 - 07-30-19 09:16 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication