[CA] [CA11] frequency tuning on b60 50/200 kz transducer

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Wade,

Q1. if i increase the frequency by the full 50 percent , will my 50kz be operating at 75? or does it not work this way.
A1. Yes. Within the Fishfinder application's settings, select the Sounder tab, followed by the Tune Frequency configuration setting. Similarly when viewing the 200kHz channel, adjustments to this setting will permit +/-50% adjustments to the frequency transmitted by the transducer. In the case of the the 200kHz frequency, this would effectively mean that this frequency could be adjusted from 300kHz (+50%) to 100kHz (-50%).

Q2. does adjusting one frequency affect the other? ie. will both 50 and 200 kz be affected if i adjust the frequency on the 200kz menu page.
A2. Negative. The frequencies are independent of one another.