The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] New system install
08-03-19, 09:32 AM (This post was last modified: 08-05-19 03:12 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] New system install
My 46 ft pilot house boat has ten year old C90W MFD's on both the upper and lower helm. This basic system utilizes a DSM30 sounder module and internal GPS from upper helm C90W. No other navigation electronics.

I intend to add a new Axiom Pro 12 RVX to the lower helm and an Axiom Pro 12 S to the upper helm. Also will be adding radar, autopilot and wind instruments. Raymarine is new to me and I have some questions.
- The Pro 12 RVX has an internal 1KW chirp sounder. When I look on the Raymarine site for compatible transducers, the Axiom series not even listed, only a, c or e series. I currently have an Airmar B60 600w through hull transducer. I know this is not as good as a 1KW chirp TD but can I use it as my primary transducer? I will not be using the 3D sonar, at least not initially.

Thanks for your help.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] New system install - Pawseidon - 08-03-19 09:32 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)