Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Axiom 12 and Axiom 9 not communicating

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom 12 and Axiom 9 not communicating
08-23-19, 02:34 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Axiom 12 and Axiom 9 not communicating
Welcome to the Raymarine Forum RV,

It is recommended that you verify that each MFD has been updated with LightHouse 3 v3.10.42 or later software. If so, then it is recommended that a Power On Factory Reset operation be performed to each MFD to address the reported issue. It is further recommended that the MFD's settings be manually reconfigured rather then restored from a saved system settings file. Restoring waypoint/route/track data may be done without concern.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Axiom 12 and Axiom 9 not communicating - Chuck - Raymarine - Moderator - 08-23-19 02:34 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication