Build Route Help

[Chuck - Raymarine - Moderator]

Jeff,

As you have suggested, commencing with the v17.45 software update, the Chart application's Chart Selection feature now provided details of the chart card's product ID, coverage area, and Freshest Data subscription expiration date. Should this data not be displayed within the Chart Selection feature, then the MFD is unable to read data from the chart card. The symptom described may be indicative of a failure of the MFD's memory card reader or of the chart card itself. It is recommended that the memory card's contacts be cleaned with a soft cloth and that the chart card be tested within the MFD's memory card reader slots. Should the MFD fail to read the chart card within one of the reader slots, then the MFD should be sent to Raymarine’s Product Repair Center to be serviced. Should the MFD fail to read the chart card within both of the reader slots, then the MFD's memory card reader should be tested by attempting to capture the MFD's screen image to a microSD memory card ... both of the MFD's memory card reader slots should be tested. Should the MFD fail in its attempt to do so, then MFD should be sent to Raymarine’s Product Repair Center to be serviced. Should the MFD successfully save a screen capture using each of its memory card reader slots, then Navionics should be contacted to address the problem with your chart card.