The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [DG] [DG11] C80 - no depth on chartploter but does show on fishfinder

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] C80 - no depth on chartploter but does show on fishfinder
08-26-19, 02:16 PM (This post was last modified: 08-27-19 07:20 AM by Derek - Raymarine - Moderator.)
Post: #1
ckroll Offline
Junior Member
**
 		Posts: 3
Joined: Aug 2019
Reputation: 0
[DG11] C80 - no depth on chartploter but does show on fishfinder
Weird problem. Performed an update and also set the unit back to factory default. I didn't notice this problem immediately because I usually use the Lowrance 3500 mounted right in front of me but assume it was happening immediately after the reset. The readout on the 3500 was fading so I took a glance over at the C80 and saw dashes where the depth was. Got settled back at the dock later and tested other components and all seemed to be working fine. Figured my transducer must have tanked and put it on the "to-do" list. But, when I was out the other day I was flipping around on the pages and happened to noticed that my fish finder WAS displaying the depth.

Any ideas???
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[DG11] C80 - no depth on chartploter but does show on fishfinder - ckroll - 08-26-19 02:16 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication