[CA11] Unable to see waypoints

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] Unable to see waypoints

09-19-19, 11:02 AM (This post was last modified: 09-19-19 11:57 AM by Chuck - Raymarine - Moderator.)

Post: #1

Paul W. Offline

Junior Member

Posts: 2
Joined: Aug 2018
Reputation: 0

[CA11] Unable to see waypoints

My setup is on a bass boat. I have a Axiom 9 and es98 at the console. On the bow I have an es128. The Axiom is set up as the master and both es units are updated to LH3. The units are connected via a Seatalk Network switch.

When I create a WP on any of the units. I can only see it on the Axiom 9 regardless of which unit created it. What am I doing wrong?

Side note question; please tell me you will be adding a blackbox for the hv-100 technology.

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] Unable to see waypoints - Paul W. - 09-19-19 11:02 AM

RE: [CA11] Unable to see waypoints - Chuck - Raymarine - Moderator - 09-19-19, 12:05 PM

RE: [CA11] Unable to see waypoints - Paul W. - 09-19-19, 01:02 PM

RE: [CA11] Unable to see waypoints - Chuck - Raymarine - Moderator - 09-19-19, 01:43 PM

User(s) browsing this thread: 1 Guest(s)