[CA] [CA11] Unable to see waypoints
|
09-19-19, 01:43 PM
Post: #4
|
|||
|
|||
RE: [CA11] Unable to see waypoints
Paul,
I would recommend proceeding with the software update to all MFDs. It would then be recommended that a Power On ResetPower On Reset be commanded on each MFD. Should each MFD not list the other MFDs thereafter, then it would be recommended that the RayNet Network Switch be examined to determine whether the status LEDs its ports which have been connected to the MFDs are all illuminated, green, and flashing rapidly. Should any the status LEDs its ports which have been connected to the MFDs not be as specified, then the Ethernet network (RayNet) cable linking the MFD to the port which is not as specified should be inspected for damage, kinking, excessively small radius bends, or splices. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] Unable to see waypoints - Paul W. - 09-19-19, 11:02 AM
RE: [CA11] Unable to see waypoints - Chuck - Raymarine - Moderator - 09-19-19, 12:05 PM
RE: [CA11] Unable to see waypoints - Paul W. - 09-19-19, 01:02 PM
RE: [CA11] Unable to see waypoints - Chuck - Raymarine - Moderator - 09-19-19 01:43 PM
|
User(s) browsing this thread: 1 Guest(s)