Raymarine forum / Raymarine Forums / Instruments v / [CA] [CA11] I50 and I60 compatible with my present hardware?

Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 3 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] I50 and I60 compatible with my present hardware?
09-26-19, 11:39 AM (This post was last modified: 09-26-19 02:18 PM by Chuck - Raymarine - Moderator.)
Post: #5
udo Offline
Junior Member
**
 		Posts: 8
Joined: Jul 2019
Reputation: 0
RE: [CA11] I50 and I60 compatible with my present hardware?
You mentioned the existence of: A06081 SeaTalkng Right Angle Adapter

This actually allows me to choose also the I70.

The transducers (wind, speed, depth) must to be connected to the SeaTalkng backbone via the ITC-5 converter, since they can not plug in to the back of the I70, right?

So I only need 1 SeaTalkng cable from my SeaTalkng backbone to the I70 and nothing else, right?

In case I want to add the I60, I get a small SeaTalk cable from the I70 to the I60, right?

The I60 will get the wind data from the SeaTalkng backbone, right?

Thanks in advance for more info,
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication