Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Axiom 12 cannot connect to WiFi

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom 12 cannot connect to WiFi
10-02-19, 07:40 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Axiom 12 cannot connect to WiFi
Welcome to the Raymarine Forum Brian,

Please click here to view a FAQ addressing this subject. Earlier LightHouse 3 software did not restrict communications with WiFi access points / routers using private addressing, as are being issued by your router. Please follow the recommendations within the referenced FAQ to utilize utilize Dynamic Host Configuration Protocol (DHCP) rather than private addressing. You can test the WiFi operational status of your MFD by configuring you phone as a WiFi hotspot and then attempting to connect your MFD's WiFi to your phone to then access the Internet for software updates.

LightHouse 3 and LightHouse II diagnostics do not support troubleshooting WiFi communications.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Axiom 12 cannot connect to WiFi - Chuck - Raymarine - Moderator - 10-02-19 07:40 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication