[CA11] AIS 650

Thread Rating:

2 Vote(s) - 5 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] AIS 650

01-13-20, 12:43 PM

Post: #4

Chuck - Raymarine - Moderator Offline

Administrator

Posts: 14,319
Joined: Oct 2014
Reputation: 43

RE: [CA11] AIS 650

bigua,

Q. what if I conect both using the cables in the C 125 and the AIS ( NMEA 0183) ?
A. It is indeed possible to interface the MFD's NMEA 0183 Port 1 leads to the corresponding 38400 BAUD NMEA 0183 leads of the AIS650 to support communications between these products. After doing so, the MFD's NMEA 0183 Port 1 will need to be configured for 38400 BAUD NMEA 0183 communications (AIS 38400) and the AIS objects layer will need to be configured ON within the Chart application page/pane being viewed.

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] AIS 650 - bigua - 10-04-19, 07:43 AM

RE: [CA11] AIS 650 - Chuck - Raymarine - Moderator - 10-04-19, 10:09 AM

RE: [CA11] AIS 650 - bigua - 01-13-20, 12:11 PM

RE: [CA11] AIS 650 - Chuck - Raymarine - Moderator - 01-13-20 12:43 PM

RE: [CA11] AIS 650 - bigua - 01-13-20, 01:00 PM

RE: [CA11] AIS 650 - Chuck - Raymarine - Moderator - 01-13-20, 01:17 PM

RE: [CA11] AIS 650 - bigua - 02-10-20, 07:16 AM

RE: [CA11] AIS 650 - Chuck - Raymarine - Moderator - 02-10-20, 09:28 AM

RE: [CA11] AIS 650 - bigua - 02-10-20, 11:43 AM

RE: [CA11] AIS 650 - Chuck - Raymarine - Moderator - 02-10-20, 01:59 PM

User(s) browsing this thread: 1 Guest(s)