Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] Device net to Seatalk backbone cable

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Device net to Seatalk backbone cable
10-08-19, 08:02 AM
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Device net to Seatalk backbone cable
Greyharbor,

Q1. So if I understand correctly, the ST6001 will never show as an autopilot icon on the Axiom Pro interface
A1. Correct.

Q2. even with the supplied device net cable plugged into the Axiom Pro NMEA 2000 plug and the other end plugged into the Seatalk bus bar?
A2. Should you be referring to use a DeviceNet (F) to SeaTalkng Spur Adapter to mate the MFD to a spur socket (white) within the SeaTalkng backbone (within very small networks, the SeaTalkng backbone may consist of a SeaTalk to SeaTalkng Converter alone), then you are indeed correct.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Device net to Seatalk backbone cable - Chuck - Raymarine - Moderator - 10-08-19 08:02 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication