Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Transferering data from C120 to Axiom Pro

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Transferering data from C120 to Axiom Pro
10-08-19, 09:33 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Transferering data from C120 to Axiom Pro
Welcome to the Raymarine Forum Glorybax,

Please ensure that the Axiom MFD is operating with LightHouse 3 v3.10.71 or later software and if not update its software accordingly. Should the problem be persist when running this version of software within the MFD, then please respond accordingly. We typically recommend that customers utilize the FSH to GPX Converter application listed within the FAQ found Raymarine’s web sitehere to perform such transfers. Should a problem be detected within the resulting GPX file's data, then please attach your archive.fsh file and the GPX file produced by the FSH to GPX Converter application to this thread for further analysis. Please additionally specifically names any known waypoints or routes which were not successfully imported into the Axiom MFD.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Transferering data from C120 to Axiom Pro - Chuck - Raymarine - Moderator - 10-08-19 09:33 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication