The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Fluxgate to P70 System
10-14-19, 09:10 AM (This post was last modified: 10-15-19 11:55 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Fluxgate to P70 System
Hi

System network components I have are as follows:

c97 MFD - connected to depth transducer and radar
P70 Pilot control head
i60 Wind instrument connected to wind transducer
Fluxgate compass

Not able to install an autopilot ACU or drive at this stage.

Without the ACU can I still get heading information to display on the P70 via a iTC-5 transducer converter? ie wire connect fluxgate to iTC-5 then connect iTC-5 to network via sea talk ng.

Would alternative to the above be to purchase an EV1 and connect that direct into the network vi sea talk ng?

Basic question I suppose is do i need the ACU to display heading information on the P70?

Any assistance appreciated. Thx in advance.

P
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Fluxgate to P70 System - Prophecy - 10-14-19 09:10 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)