The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Connecting seatalkNG to Axio Pro NMEA 2000

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Connecting seatalkNG to Axio Pro NMEA 2000
10-16-19, 08:54 PM (This post was last modified: 10-18-19 10:30 AM by Chuck - Raymarine - Moderator.)
Post: #1
nickvh Offline
Junior Member
**
 		Posts: 18
Joined: Mar 2017
Reputation: 0
[CA11] Connecting seatalkNG to Axio Pro NMEA 2000
Hi - got the new plotter installed and converted STHS cables as you guys suggested and radar is working great on the new screen.

On the old plotter i had what I think is a seatalk ng cable (black/white stripe) with a white connector at the end.

However Axiom XL has a screw bayonet type NMEA200 connector.

Is there a simple way to plug these together or maybe I buy a multi connector like i use for the main seatlak ng network and connect the cable supplied with the Axiom and the source cable into that with two terminators on the end?

like this one
https://www.amazon.com/Raymarine-5-Way-C...B0141OBGEO
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Connecting seatalkNG to Axio Pro NMEA 2000 - nickvh - 10-16-19 08:54 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication