[TG] [TG11] Axiom 9RV 3D Depth

[lwilson]

Tom,
Can you please clarify the statement "if you were to use a 600W transducer, e.g. P66, connected to the Axiom via a Y-cable then that would repurpose and take over the current Chirp Sonar channel and divert it to the 600W, 50/200kHz transducer."

I have the Axiom 9 Pro RVX so not sure if that makes a difference.
I am using the RV-100 RealVisionâ„¢ 3D Transom Mount Transducer and a P66 adapted to be mated to the MFD's 1kW Transducer socket by using the A80496 Transducer Adapter Cable to get speed through water and a 50/200kHz transducer.
I create windows selecting the transducer that I would like to use and what other information I want displayed in the window. eg. Chirp sonar with SOG,STW and COG or P66 50 HZ sonar with SOG, STW and COG.

So I am no longer seeing the Chirp sonar image when I select the RV-100 transducer with the P66 connected to the MFD's 1kW Transducer socket by using the A80496 Transducer Adapter Cable ?

As it was never stated when I asked questions in an earlier post on the forum about system configurations.