European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
|
[CA] [CA11] Autohelm AP into NMEA2000 integration
|
|
11-09-19, 11:51 PM
(This post was last modified: 11-12-19 09:05 AM by Chuck - Raymarine - Moderator.)
Post: #5
|
|||
|
|||
|
RE: [CA11] Autohelm AP into NMEA2000 integration
It seems that the AP is the Autohelm Type 100. If my research is correct the Seatalk1 to SeatalkNG converter will not work because the Seatalk version on this unit is too old. Based on the documentation I found it is recommended to use a NMEA0183 to NMEA2000 device and then use NMEA200 to SeatalkNG converter if one wants to go that route. For me, that is not necessary as all I was trying to do is connect my Rose Point Nemo box to the AP for navigation.
That being said, considering that the data speed is 4800bps can I just use regular two twisted pairs phone line cable to connect these? Thanks. |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
[CA11] Autohelm AP into NMEA2000 integration - Shipsngiggles - 11-04-19, 03:55 PM
RE: [CA11] Autohelm AP into NMEA2000 integration - Chuck - Raymarine - Moderator - 11-07-19, 04:35 PM
RE: [CA11] Autohelm AP into NMEA2000 integration - Shipsngiggles - 11-09-19, 07:45 AM
RE: [CA11] Autohelm AP into NMEA2000 integration - Chuck - Raymarine - Moderator - 11-09-19, 08:40 PM
RE: [CA11] Autohelm AP into NMEA2000 integration - Shipsngiggles - 11-09-19 11:51 PM
RE: [CA11] Autohelm AP into NMEA2000 integration - Chuck - Raymarine - Moderator - 11-12-19, 09:12 AM
|
User(s) browsing this thread: 1 Guest(s)