[LW] [LW11] I70s and ITC-5 wind problem
|
11-29-19, 05:30 AM
Post: #2
|
|||
|
|||
RE: [LW11] I70s and ITC-5 wind problem
Dear fozzy83,
Thank you for your post. What software are you running on the iTC-5? Is your STng backbone installed correctly and terminated with a terminator at each end? Is there a healthy 12v power supply going to the iTC-5? The wind transducer is power from the iTC-5 and if there is not sufficient power the instruments will not show any data. There is also a test you can perform using a voltmeter to ensure the transducer is functioning, further information is available here. What else is on your network? Can you provide a system installation diagram? Are you using a triducer for speed and depth? Many Thanks Louise |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[LW11] I70s and ITC-5 wind problem - fozzy83 - 11-23-19, 01:29 PM
RE: [LW11] I70s and ITC-5 wind problem - Louise - Raymarine - Moderator - 11-29-19 05:30 AM
RE: [LW11] I70s and ITC-5 wind problem - fozzy83 - 11-30-19, 06:07 AM
RE: [LW11] I70s and ITC-5 wind problem - Louise - Raymarine - Moderator - 12-06-19, 09:43 AM
RE: [LW11] I70s and ITC-5 wind problem - fozzy83 - 12-14-19, 12:09 AM
RE: [LW11] I70s and ITC-5 wind problem - fozzy83 - 12-19-19, 03:03 AM
RE: [LW11] I70s and ITC-5 wind problem - Louise - Raymarine - Moderator - 12-19-19, 10:14 AM
RE: [LW11] I70s and ITC-5 wind problem - fozzy83 - 12-24-19, 06:57 AM
RE: [LW11] I70s and ITC-5 wind problem - Louise - Raymarine - Moderator - 01-16-20, 05:56 AM
|
User(s) browsing this thread: 1 Guest(s)