[LW] [LW11] I70s and ITC-5 wind problem
|
12-19-19, 03:03 AM
Post: #6
|
|||
|
|||
RE: [LW11] I70s and ITC-5 wind problem
Hi Louise
When testing the wind transducer with the other connections removed I was only getting just over a volt between shield and Red. I then tested the resistance between the two connections and got 22 ohms. I now believe I have a short at the top of the mast. I’ve tested at the junction box at the base and this is fine. Doesn’t explain why speed does not work though even though the ITC-5 indicates no fault. I’ve added a sketch of my network for you to view. Any advice given the network architecture would be appreciated. I take it the network takes its power supply through the Autopilot control unit, is this correct? Thanks |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[LW11] I70s and ITC-5 wind problem - fozzy83 - 11-23-19, 01:29 PM
RE: [LW11] I70s and ITC-5 wind problem - Louise - Raymarine - Moderator - 11-29-19, 05:30 AM
RE: [LW11] I70s and ITC-5 wind problem - fozzy83 - 11-30-19, 06:07 AM
RE: [LW11] I70s and ITC-5 wind problem - Louise - Raymarine - Moderator - 12-06-19, 09:43 AM
RE: [LW11] I70s and ITC-5 wind problem - fozzy83 - 12-14-19, 12:09 AM
RE: [LW11] I70s and ITC-5 wind problem - fozzy83 - 12-19-19 03:03 AM
RE: [LW11] I70s and ITC-5 wind problem - Louise - Raymarine - Moderator - 12-19-19, 10:14 AM
RE: [LW11] I70s and ITC-5 wind problem - fozzy83 - 12-24-19, 06:57 AM
RE: [LW11] I70s and ITC-5 wind problem - Louise - Raymarine - Moderator - 01-16-20, 05:56 AM
|
User(s) browsing this thread: 1 Guest(s)