[LW11] connecting an A70D chartplotter to a NASA GPS repeater

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[LW] [LW11] connecting an A70D chartplotter to a NASA GPS repeater

11-28-19, 10:45 AM

Post: #6

adamcovell Offline

Junior Member

Posts: 12
Joined: Nov 2019
Reputation: 0

RE: [LW11] connecting an A70D chartplotter to a NASA GPS repeater

I would add that you can see from the diagram I have 2 GPS receivers, 1 is plugged into the AIS (AIT1000) box and then connected into the port 1 of the chart plotter (A70d) . The second is the RS125 (into NMEA port 2).

When I reconnected these items i did the AIS first and powered up. This gave a fix straight away. I then wired in the RS 125 and it seemed to also work. This is how the boat was when i got it.

Is it a bad idea to have 2 GPS receivers connected like this? Could this be causing problems with the repeater?

« Next Oldest | Next Newest »

Messages In This Thread

[LW11] connecting an A70D chartplotter to a NASA GPS repeater - adamcovell - 11-25-19, 03:48 PM

RE: [LW11] connecting an A70D chartplotter to a NASA GPS repeater - Louise - Raymarine - Moderator - 11-27-19, 10:48 AM

RE: [LW11] connecting an A70D chartplotter to a NASA GPS repeater - adamcovell - 11-28-19, 09:36 AM

RE: [LW11] connecting an A70D chartplotter to a NASA GPS repeater - Louise - Raymarine - Moderator - 11-28-19, 10:35 AM

RE: [LW11] connecting an A70D chartplotter to a NASA GPS repeater - adamcovell - 11-28-19, 10:39 AM

RE: [LW11] connecting an A70D chartplotter to a NASA GPS repeater - adamcovell - 11-28-19 10:45 AM

RE: [LW11] connecting an A70D chartplotter to a NASA GPS repeater - Louise - Raymarine - Moderator - 12-02-19, 10:22 AM

RE: [LW11] connecting an A70D chartplotter to a NASA GPS repeater - adamcovell - 12-03-19, 04:45 AM

RE: [LW11] connecting an A70D chartplotter to a NASA GPS repeater - Louise - Raymarine - Moderator - 12-03-19, 09:41 AM

User(s) browsing this thread: 1 Guest(s)