Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] T210 to seatalkng integration
12-13-19, 09:47 AM (This post was last modified: 12-13-19 11:38 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] T210 to seatalkng integration
Hi Guys, I have a full seatalkng installation in my 41 ' sailboat (two plotters, C95 inside and ES series outside, I50, I60, I70, Quantum radar, Autopilot).

I want to add large displays in the mast, and the only solution in the Raymarine family so far looks like being the wireless T210 and T215. Question: How can I connect them to my installation? Is the wireless data sent from my plotter enough? Should I add any interfase?

Regards,
Find all posts by this user
Quote this message in a reply
12-13-19, 12:04 PM (This post was last modified: 12-13-19 12:05 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] T210 to seatalkng integration
Welcome to the Raymarine Forum alejandro,

In fact, E70361 Raymarine's Micro-Talk Wireless Performance Sailing Gateway is designed just for this purpose ... to function as a wireless bridge between TackTick products and a SeaTalkng / NMEA 2000 backbone. This solution would permit instrument data from your currently installed Raymarine products to be displayed on the TackTick wireless displays. The Micro-Talk would simply be interfaced as a spur to the system's backbone.
Visit this user's website Find all posts by this user
Quote this message in a reply
12-23-19, 11:09 PM (This post was last modified: 12-24-19 09:11 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA11] T210 to seatalkng integration
Thank you, Chuck!
Find all posts by this user
Quote this message in a reply
12-24-19, 09:12 AM
Post: #4
RE: [CA11] T210 to seatalkng integration
You're welcome.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us