Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom Pro RVX - High / Low chirp Transducers??
02-18-20, 11:02 AM
Post: #14
RE: [CA11] Axiom Pro RVX - High / Low chirp Transducers??
Don,

A rather significant performance improvement to the LightHouse 3 fishfinding features were included within the LightHouse 3 v3.11.42 software update. Should I not already have specified, please ensure that the Axiom MFD(s) have been updated with LightHouse 3 v3.11.42 or later software, that a Power On Reset Procedure has been performed following the software update, and that the system's settings have then been manually reconfigured rather than restored from a saved settings file. Please additionally verify that the CP470 (if installed) has been updated with v14.18 software. The system should then be tested with all fishfinder features maintained within their default / auto settings. Should the problem persist when tested in the manner specified above, then please respond accordingly and indicate whether a CP470 was used within the system.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Axiom Pro RVX - High / Low chirp Transducers?? - Chuck - Raymarine - Moderator - 02-18-20 11:02 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)