[TG] [TG11] Axiom 9(Non-Pro) and RV-100 Transducer

[Tom - Raymarine - Moderator]

Hello Joe,

By far the most cost-effective solution would be to connect a 600W non-Chirp 50/200kHz transducer (e.g. an E66054 P66 type) to the Axiom via an A80492 Y-cable alongside the RV-100. The only drawback of this is that the High Chirp channel gets redirected to the 50/200 transducer and is no longer available from the RV-100.

I don't see any appreciable benefit to adding an eS MFD into the system: eS98/128 have the same High Chirp as the RV-100, and eS97/127 have the same 600W, 50/200kHz output as the above solution.
Axiom Pro or a CP370 black-box would add 1kW support but you don't need that for 200ft (unless you want to...)

Regards,
Tom