Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Ev1 autopilot 200/C120 classic
02-10-20, 03:16 PM (This post was last modified: 02-10-20 04:31 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Ev1 autopilot 200/C120 classic
I have connected with sea talk. The auto pilot works correctly but does not pick up the go to waypoint setting on C120. Auto pilot will say no navigation data when trying to send over waypoint setting from c120. Is this a c120 software problem?
Find all posts by this user
Quote this message in a reply
02-10-20, 04:37 PM
Post: #2
RE: [CA11] Ev1 autopilot 200/C120 classic
Welcome to the Raymarine Forum Waveseeker55,

When interfaced to a C-Series Classic MFD via a SeaTalk to SeaTalkng Converter, the local magnetic variation must be manually supplied to the Evolution autopilot via the autopilot's control head (MENU->SET-UP->USER PREFERENCES->VARIATION->VARIATION MODE->ON). Should this not occur, then the Evolution autopilot will respond with the symptom which you have indicated.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us