E127 software upgrade
|
06-08-16, 03:15 PM
Post: #6
|
|||
|
|||
RE: E127 software upgrade
Chris,
The the Dock to Dock user interface of the Navionics Boating app differs from that supported by the Raymarine MFDs. Within the Raymarine MFDs, the Dock to Dock feature is executed by first commanding the Navionics Dock to Dock feature (MENU->NAVIGATE->BUILD ROUTE->DOCK TO DOCK AUTOROUTING) to ON. Should the MFD not have been updated with v17.45 or later a/c/e/eS/gS-Series MFD software and/or the Nautical Charts and/or Sonar Charts within the chart card not have been updated since 1 April 2015, then an Autorouting option rather than a Dock To Dock Autorouting feature will be listed within the Build Route menu. When using the Dock to Dock Feature, the first and last waypoints of the Dock to Dock feature are established by touching the Chart application's screen a the desired location of the route's first and last waypoints. Selection of the second point will then permit the route to be calculated. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
E127 software upgrade - Eniam17 - 06-06-16, 02:39 PM
RE: E127 software upgrade - Chuck - Raymarine - Moderator - 06-06-16, 02:56 PM
RE: E127 software upgrade - Eniam17 - 06-06-16, 04:21 PM
RE: E127 software upgrade - Chuck - Raymarine - Moderator - 06-07-16, 08:08 AM
RE: E127 software upgrade - Eniam17 - 06-07-16, 05:25 PM
RE: E127 software upgrade - Chuck - Raymarine - Moderator - 06-08-16 03:15 PM
RE: E127 software upgrade - djpfinancial - 06-25-16, 06:47 PM
RE: E127 software upgrade - djpfinancial - 06-25-16, 06:52 PM
RE: E127 software upgrade - Chuck - Raymarine - Moderator - 06-27-16, 09:13 AM
RE: E127 software upgrade - irishspirits - 06-27-16, 04:12 PM
RE: E127 software upgrade - Chuck - Raymarine - Moderator - 06-28-16, 08:05 AM
|
User(s) browsing this thread: 1 Guest(s)