[CA11] Element S Not Syncing with I50 Speed / Depth

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] Element S Not Syncing with I50 Speed / Depth

02-25-20, 11:58 AM (This post was last modified: 02-25-20 12:00 PM by Chuck - Raymarine - Moderator.)

Post: #2

Chuck - Raymarine - Moderator Offline

Administrator

Posts: 14,319
Joined: Oct 2014
Reputation: 43

RE: [CA11] Element S Not Syncing with I50 Speed / Depth

Welcome back to the Raymarine Forum David,

Synchronization and Data Source selection only applies to systems in which more than one source of any specific type of data (GPS, wind, STW, etc.) is present within the system. You system does not feature two or more sources of any of the data types which may be selected within the Element display's Data Sources feature. Additionally, system settings (ex. units, etc.) are not synchronized between Element displays and other products.

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] Element S Not Syncing with I50 Speed / Depth - andrew@apwengineering.com - 02-25-20, 12:45 AM

RE: [CA11] Element S Not Syncing with I50 Speed / Depth - Chuck - Raymarine - Moderator - 02-25-20 11:58 AM

RE: [CA11] Element S Not Syncing with I50 Speed / Depth - andrew@apwengineering.com - 02-25-20, 04:51 PM

RE: [CA11] Element S Not Syncing with I50 Speed / Depth - Chuck - Raymarine - Moderator - 02-25-20, 05:31 PM

RE: [CA11] Element S Not Syncing with I50 Speed / Depth - andrew@apwengineering.com - 02-25-20, 08:20 PM

RE: [CA11] Element S Not Syncing with I50 Speed / Depth - Chuck - Raymarine - Moderator - 02-26-20, 08:53 AM

User(s) browsing this thread: 1 Guest(s)