Raymarine forum / Raymarine Forums / Product Selection Assistance v / [CA] [CA11] Upgrade to Axiom and integrate the rest

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Upgrade to Axiom and integrate the rest
02-28-20, 11:07 AM
Post: #6
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Upgrade to Axiom and integrate the rest
BD,

Q. Since this is an Axiom Pro, I could connect the Autopilot using the PWR/Video/NMEA 0183 port to the MFD directly.
A. This is indeed correct. Were this a sailing vessel, I would continue to recommend the Actisense NGW-1-STNG NMEA 0183 to NMEA 2000 Gateway to support bridging of wind data to the autopilot to permit the pilot to be sailed to wind while the MFD is switched OFF to conserve power. However, based upon the equipment listed to this point, the vessel appears to be a power driven vessel rather than a sailing vessel.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Upgrade to Axiom and integrate the rest - Chuck - Raymarine - Moderator - 02-28-20 11:07 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication