Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom 12 screen frozen at logo screen
03-02-20, 11:39 AM
Post: #2
RE: [CA11] Axiom 12 screen frozen at logo screen
Welcome to the Raymarine Forum aMonster,

Please remove any chart card / microSD memory card from the MFD's memory card reader. Please click here to view a FAQ the revised procedure for performing a Power ON Factory Reset. Should the Power ON Factory Reset restore operation, then it would be recommended that the MFD be updated with the latest available Raymarine product software update and that a Power ON Factory Reset be performed again upon completion of the software update. Should the MFD perform properly when the chart card / microSD memory card is removed, then it would be recommended that the MFD's memory card reader be tested with another compatible microSD memory card to verify that the MFD can save screen snapshots to the microSD memory card (see the Shortcuts menu) ... the MFD will report being successful or unsuccessful when commanded to perform the screen capture. If not, then it would be recommended that the MFD be sent to Raymarine’s Product Repair Center to be bench checked / serviced. Raymarine MFDs carry a 2-year warranty which may be extended to 3 years if installed by a Certified Raymarine Installer / OEM or registered within the first 30 days of ownership. Should the MFD's memory card reader be deemed to be operational, then it would be recommended that the chart card / microSD memory card be tested by your Raymarine dealer or Navionics / C-Map dealer.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Axiom 12 screen frozen at logo screen - Chuck - Raymarine - Moderator - 03-02-20 11:39 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)