European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
Raymarine forum
/
Raymarine Forums
/
Networking / System Integration 
/
[CA] [CA11] i70s SeaTalk 1- SeaTalkng- NMEA2000
/
[CA] [CA11] i70s SeaTalk 1- SeaTalkng- NMEA2000
|
[CA] [CA11] i70s SeaTalk 1- SeaTalkng- NMEA2000
|
|
03-06-20, 06:10 AM
(This post was last modified: 03-06-20 11:29 AM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
|
[CA11] i70s SeaTalk 1- SeaTalkng- NMEA2000
i have the following:
i70s kit T70216 Autopilot S1G (with ST6002, fluxgate and rudder sensor) AIS (non-Raymarine with NMEA 0183 and 2000 i/o) When I try to figure out how to connect to 1)get wind info to the autopilot 2) to display AIS info on the i70s, it seems that all I have to do is to connect the AIS and autopilot to the backbone SeaTalkng backbone via adaptor cables as the i70s supposedly will handle the bridging. (Obviously I need to avoid double power supply) Being a firm believer in Murphy this seems a bit to simple. |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
[CA11] i70s SeaTalk 1- SeaTalkng- NMEA2000 - Relax - 03-06-20 06:10 AM
RE: [CA11] i70s SeaTalk 1- SeaTalkng- NMEA2000 - Chuck - Raymarine - Moderator - 03-06-20, 11:54 AM
RE: [CA11] i70s SeaTalk 1- SeaTalkng- NMEA2000 - Relax - 03-08-20, 05:22 AM
RE: [CA11] i70s SeaTalk 1- SeaTalkng- NMEA2000 - Chuck - Raymarine - Moderator - 03-09-20, 09:05 AM
|
User(s) browsing this thread: 1 Guest(s)