Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Upgrading from ES to Axiom pro compatibility
03-15-20, 10:47 PM (This post was last modified: 03-16-20 03:56 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Upgrading from ES to Axiom pro compatibility
I just acquired a Axiom pro RVX. I am running a es128 and es98(along with hd color Radar, ev150, flir m132, Sirius weather and rs130) both running new LH 3 (and updated last week March 2020). Will the axiom and es98 be compatible in the same network(axiom pro being master mfd)? Can I temporarily use the cpt100 transducer that is current on the boat until I can get the rv100 installed? The kids are off this week and want to boat and it will take me a few weeks before I can get it installed.
Find all posts by this user
Quote this message in a reply
03-18-20, 10:57 AM
Post: #2
RE: [CA11] Upgrading from ES to Axiom pro compatibility
Welcome to the Raymarine Forum rltrbill,

Should the currently installed satellite weather receiver be a SR200 or SR150, and should both MFDs be operating with LightHouse 3 v3.11.42, then the Axiom Pro MFD and eS-Series MFD may indeed be interfaced to a common Ethernet network. Within mixed systems such as this, it would be recommended that the Axiom/Axiom Pro/Axiom XL MFD additionally (or in place of the eS/gS MFD) be interfaced as a spur to the backbone and be designated as the system's Data Master MFD. The CPT-100 transducer may remain connected to the eS128 MFD or may be adapted (part #A80490) to be mated to the RealVision Transducer socket of the Axiom Pro RVX MFD.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us