[CA] [CA11] RS125 - No communication
|
03-29-20, 01:42 AM
(This post was last modified: 03-30-20 09:30 AM by Chuck - Raymarine - Moderator.)
Post: #5
|
|||
|
|||
RE: [CA11] RS125 - No communication
I have done some more fault finding but first let me try to explain the system. At the helm station I have a E120 Classic MFD a i70, ST60+and ST6002. The i70 is connected with Seatalkng through a iTC5 and the ST60+ is connected to Seatalkng. See photo attached.
The navigation station has the following instruments. E120 classic MFD (Set as data master) a St60+ a ST70 and a Smart controller (A18105) for the autopilot. I found that when I switch the E120 at the helmstation off that the GPS works fine most of the time. I checked the software versions for both the E120 MFD's and found that the one at the navigation station (Data master) is v5.52. The one at the helm station is v5.69. I have no idea why the previous owners did not upgrade both. I also sometimes get a "No data master set" message at the helmstation. I guess the starting point would be to upgrade both to the latest version. Is it 5.69 and will all else still work fine if I upgrade both. Regards |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] RS125 - No communication - Zulu - 03-26-20, 07:23 PM
RE: [CA11] RS125 - No communication - Chuck - Raymarine - Moderator - 03-27-20, 09:00 AM
RE: [CA11] RS125 - No communication - Zulu - 03-27-20, 04:55 PM
RE: [CA11] RS125 - No communication - Chuck - Raymarine - Moderator - 03-27-20, 05:59 PM
RE: [CA11] RS125 - No communication - Zulu - 03-29-20 01:42 AM
RE: [CA11] RS125 - No communication - Chuck - Raymarine - Moderator - 03-30-20, 09:29 AM
RE: [CA11] RS125 - No communication - Zulu - 04-02-20, 06:28 AM
RE: [CA11] RS125 - No communication - Chuck - Raymarine - Moderator - 04-02-20, 08:07 AM
RE: [CA11] RS125 - No communication - Zulu - 04-02-20, 09:01 PM
RE: [CA11] RS125 - No communication - Chuck - Raymarine - Moderator - 04-03-20, 08:13 AM
|
User(s) browsing this thread: 1 Guest(s)