Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Clinometer readout on MFD devices
04-29-20, 02:25 AM (This post was last modified: 04-29-20 08:23 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Clinometer readout on MFD devices
Given that the EV1 has heel Angie information, would it be possible to add an inclinometer function to the i70 and other MFD displays? This would be incredibly useful. As the data is already available, this might not be that difficult
Find all posts by this user
Quote this message in a reply
04-29-20, 08:47 AM
Post: #2
RE: [CA11] Clinometer readout on MFD devices
Welcome back to the Raymarine Forum Art,

When operating with the latest available Raymarine product software updates and interfaced to a source of roll data (ex. an EV-1 CCU, etc.), the i70S/i70 MFIDs, Axiom/Axiom Pro/Axiom XL MFDs, and a/c/e/eS/gS-Series MFDs will support displaying the Roll, Roll, and Heel Angle data items respectively. These data items may be found within the Boat data group.
Find all posts by this user
Quote this message in a reply
05-01-20, 01:43 AM
Post: #3
RE: [CA11] Clinometer readout on MFD devices
Chuck
Thanks for this.
Is this on both i70 & i70s displays?
I have the i70s. Any idea what FW update this was on?

You guys are the best!!!
Find all posts by this user
Quote this message in a reply
05-04-20, 05:57 AM (This post was last modified: 05-05-20 08:17 AM by Chuck - Raymarine - Moderator.)
Post: #4
RE: [CA11] Clinometer readout on MFD devices
Art,

Q1. Is this on both i70 & i70s displays?
A1. Yes. The i70 and i70S MFIDs utilize the same software.

Q2. I have the i70s. Any idea what FW update this was on?
A2. I am uncertain about when this feature was introduced, however, it may be specified that heel angle is supported within the latest available i70/i70S MFID software update. It is additionally recommended that you ensure that your Evolution autopilot components have been updated with the latest available software updates.
Find all posts by this user
Quote this message in a reply
05-04-20, 03:52 PM
Post: #5
RE: [CA11] Clinometer readout on MFD devices
Hi Chuck,,
Ok, I’ve got it on my i70 now. That’s the good news.
The not great news is that they disabled the graphical display as far as options are concerned. In other words, it will show you 10 degrees of heel at 10.
It would be infinitely more usable if they had the semi- circular graphic display, with a number attached.
Is there any reality that your folks could consider this? From a programming standpoint, I believe it’s fairly trivial, as they already have the display function for other items
Thanks so much !!!
Find all posts by this user
Quote this message in a reply
05-05-20, 08:21 AM
Post: #6
RE: [CA11] Clinometer readout on MFD devices
Art,

Your feature suggestion will be logged accordingly to be considered for inclusion within a future i70/i70S MFID software update.

Please click here for more information concerning product and feature suggestions.
Find all posts by this user
Quote this message in a reply
05-06-20, 08:02 PM
Post: #7
RE: [CA11] Clinometer readout on MFD devices
Chuck,
Thanks so much!

Arthur
Find all posts by this user
Quote this message in a reply
05-07-20, 09:20 AM
Post: #8
RE: [CA11] Clinometer readout on MFD devices
your welcome,
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)