[TG] [TG11] eS78 Heading config not staying on Head up

[Tom - Raymarine - Moderator]

Hello TheOiler,

Quote:I cannot get the "Heading Up" option to remain. She keeps reverting to "North up" on the chart

I've come across that sort of symptom very occasionally on both LH2 and LH3 software, where certain chart setup options aren't saved on certain chart pages (it's almost always chart pages, and usually the chart orientation.)

The solution is to create a new chart page shortcut on another location on the Home screen and delete the old shortcut. If you wish you can then move/swap the new chart page shortcut into the spot where the old one was (deleting and re-creating in the same spot doesn't always resolve the problem, you seem to need to create in a new spot on the home screen.)

I've only had a handful or two of these over the years, but that process has always fixed it and it doesn't seem to come back again. A low-level software issue, but rare enough that it's very hard to get to the root cause of.

Quote:Also the speed does not show on the upper drop down window. The SOG box is there but no reading is visible.

If you're not under way then there is no SOG to display. If you have GPS position then the SOG and COG will also be available as soon as you get under way.

Regards,
Tom