Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
MIM upgrade for STV37
05-18-20, 08:30 AM
Post: #1
MIM upgrade for STV37
Hi,
Is there a MIM upgrade for the Raymarine STV systems to use the Wally receiver? I know Intellian has this MIM upgrade to allow for the auto switching function to work properly. If not, Is the Raymarine MIM and the intellian MIM the same MIM just rebranded?
Thanks
Find all posts by this user
Quote this message in a reply
05-20-20, 02:24 PM
Post: #2
RE: MIM upgrade for STV37
Hello unixdood,

What is the part number of the 37STV? Not all of them are compatible.

Chris,
Find all posts by this user
Quote this message in a reply
05-29-20, 01:47 PM
Post: #3
RE: MIM upgrade for STV37
Sorry for the delay but havent been back to the boat. I do know it is for Gen1 37STV
Find all posts by this user
Quote this message in a reply
06-11-20, 11:24 AM
Post: #4
RE: MIM upgrade for STV37
Hi unixdood,

The Gen1 37 STV is not compatible with the MIM or Dish Network. The antenna system would need to be a Gen 2 or newer. There is unfortunately no upgrade to the system. The entire Gen1 37STV system would need to be replaced with a compatible system like the Gen 2 or B4 37 STV.

Chris,
Find all posts by this user
Quote this message in a reply
06-11-20, 11:36 AM (This post was last modified: 06-11-20 09:39 PM by Jules - Raymarine - Moderator.)
Post: #5
RE: MIM upgrade for STV37
Thanks Chris. I have been running the Gen1 with the wally for 2 years now on Dish and has worked fine. I was just curious if there was a MIM upgrade to assist in support of the switching of networks
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)