Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] Sonar Addition to Es7 Configuration
05-26-20, 10:39 PM
Post: #4
RE: [TG11] Sonar Addition to Es7 Configuration
Hello Sailing4us,

You can connect any of the CP370-compatible transducers listed here to an eS97 or eS127 via an E66066. The relevant B744V part number is A66091, and this can provide depth-speed-temp in place of the DST if you wish. In a single network you can only have a single (active) source of a particular type of data, so if you wanted to retain the DST so as to get the depth below the opposite hull then it (and the ITC5, assuming your DST is the analogue variant connected to the ITC5 at present) would need to be connected on a separate, standalone STNG network with something like an i50 Tridata or i70S display.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [TG11] Sonar Addition to Es7 Configuration - Tom - Raymarine - Moderator - 05-26-20 10:39 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)