Raymarine forum / Raymarine Forums / Autopilots v / EV-100 Deviation Change with R17

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
EV-100 Deviation Change with R17
06-19-16, 10:50 PM (This post was last modified: 06-20-16 09:06 AM by Chuck - Raymarine - Moderator.)
Post: #4
mswanicke Offline
Junior Member
**
 		Posts: 34
Joined: Mar 2016
Reputation: 0
RE: EV-100 Deviation Change with R17
I did the factory reset, re-executed the dockside wizard, followed by a short trip as you said, however, that was not sufficient for the autopilot to determine deviation. A compass reset had to performed during the test drive. During the compass reset, an odd message came on the screen "DO_NOT_EDIT___WILL BE FILLED_IN_BY_TRANSLATORS". What's that about? Also, deviation still at 38 after second test drive. No change in component locations from previous software update. Can I reinstall the previous version?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: EV-100 Deviation Change with R17 - mswanicke - 06-19-16 10:50 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication