Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] No radar overlay on Axiom/Quantum 2
06-01-20, 01:12 AM
Post: #2
RE: [TG11] No radar overlay on Axiom/Quantum 2
Hello unixdood,

Heading data, from the sound of it. The radar data is oriented to the bow whereas the chart is oriented to north, and the system needs a way to relate one to the other. If you don't have an autopilot or other source of heading data then you can use GPS COG instead (by selecting Use radar without heading data in Menu > Settings > Advanced in the Chart app, but you should be aware that:
  1. this will only work when you're under way fast enough to generate reliable COG data
  2. COG is the direction you're moving (whereas heading is the direction your bow is facing) and if there's any leeway or tide or you're making heading changes, your radar will not line up with your chart. Personally I'm not a fan of radar-chart overlay from COG, I think radar-chart overlay without good-quality heading is counter-productive, but it's there if you want it.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [TG11] No radar overlay on Axiom/Quantum 2 - Tom - Raymarine - Moderator - 06-01-20 01:12 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)