The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / e127 and ST60 Autopilot

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
e127 and ST60 Autopilot
06-14-16, 09:17 AM
Post: #1
cbd@gov-consult.com Offline
Junior Member
**
 		Posts: 8
Joined: May 2016
Reputation: 0
e127 and ST60 Autopilot
Upgraded my e127 to the latest software release (May 2016) and now my autopilot is rendered just about useless - will not hold any course and zig zags widely when trying to use. Operating the ST60 from the MFD and prior to the update of the software it worked fine. I see a note with the software update that my autopilot will need to be recalibrated. Is this correct and if so will recalibration be required for all future software updates? Any other suggestions would be welcome if this is not a autopilot recalibration issue.
Thanks!
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
e127 and ST60 Autopilot - cbd@gov-consult.com - 06-14-16 09:17 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication