Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] Vector color - LH2 heading and COG vectors
05-29-20, 12:06 PM (This post was last modified: 06-09-20 03:02 AM by Tom - Raymarine - Moderator.)
Post: #1
[TG11] Vector color - LH2 heading and COG vectors
Hi,

I have dual GS125's running v19.03. Is there any way to change the heading or COG vector colors?

Thanks,
-Bill
Find all posts by this user
Quote this message in a reply
06-09-20, 03:23 AM
Post: #2
RE: [TG11] Vector color - LH2 heading and COG vectors
Hello Bill,

No, I'm afraid not. The colours we've used were carefully chosen so as not to conflict with other chart elements, to be visible at a range of brightness/backlight levels and as far as possible to be distinguishable to users with certain forms of colour insensitivity I believe, and all that leaves little room for movement.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)