[TG] [TG11]E22158 + ST-Ng Female / DeviceNet(N2K) Male = Solution to S2G, ST8002 + NMEA CP

[Tom - Raymarine - Moderator]

Hello OldPete,

Quote:E22158, center port goes to the ST1 on the back of the 8002. Yes?

Anywhere into the ST1 network, any available port. It doesn't matter which, though the ST8002 is fine.

Quote:White port on E22158 gets the ST-Ng end of the cable mentioned.
Other end of above cable goes to N2K backbone...

Although this will pass data through, I would strongly recommend not connecting like this. This will give you two empty Backbone sockets (blue) which are prone to shorts (exposed 12V pins) and corrosion from condensation over time, or having terminators plugged into them at some future stage. All of these would bring down the STNG/NMEA2000 network.
The right way to do this is joining backbone-to-backbone (via an STNG blue socket) with one terminator in the end of the STNG network (E22158) and the other terminator in the end of the existing NMEA2000 network. We will shortly be releasing new adaptor cables to make this easy, which will be blue STNG backbone to Devicenet (A80674 is to Devicenet male, A80675 is to Devicenet female.)

Once things are connected, yes, the S2 should be able to send heading data to and receive tracking information from a Garmin plotter. What the S2 needs to see is bearing-to-waypoint, distance-to-waypoint, waypoint name/number and cross-track error. From memory it needed magnetic BTW, or true BTW plus magnetic variation (or manually-configured variation in the pilot display.)

Regards,
Tom