No autopilot after R17 update

[Chuck - Raymarine - Moderator]

Night Heron,

Please verify that you have performed a Pilot Factory Reset and then attempted to re-commission the autopilot. To reset calibration settings, the command sequence MENU->SET-UP->AUTOPILOT CALIBRATION->COMMISSIONING->PILOT FACTORY RESET must be executed.

Should the problem persist, then please attach the system's diagnostics file. Should an a/c/e/eS/gS-Series MFD be powered ON and the Limitations of Use dialog have already been acknowledged, then the requested diagnostics file may be generated via the following command sequence on the Data Master MFD: HOME->SET-UP->MAINTENANCE->DIAGNOSTICS->SELECT DEVICE; SHOW ALL DATA->SAVE THIS DATA. The resulting Diagnostics...html file should then be attached your response to this thread.