Replacing s2 with ev-200

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

Replacing s2 with ev-200

07-03-16, 05:44 PM (This post was last modified: 07-05-16 09:42 AM by Chuck - Raymarine - Moderator.)

Post: #5

riptyler Offline

Junior Member

Posts: 9
Joined: Jun 2016
Reputation: 0

RE: Replacing s2 with ev-200

So, it almost all went as planned... since my ST bus was part of the original install, it was getting groud via connecting to the E80 on the flybridge (which I disconnect from ST and connected to NG (and HS), so there was no ground since the ST to STNG converter only has power and data wires. Converter instructions need bolded statement to make sure to provide a new ground source (since the converter now supplies the power).

Thanks,
Rip

« Next Oldest | Next Newest »

Messages In This Thread

Replacing s2 with ev-200 - riptyler - 06-27-16, 09:39 AM

RE: Replacing s2 with ev-200 - Chuck - Raymarine - Moderator - 06-27-16, 02:33 PM

RE: Replacing s2 with ev-200 - riptyler - 06-28-16, 09:13 AM

RE: Replacing s2 with ev-200 - Chuck - Raymarine - Moderator - 06-28-16, 10:18 AM

RE: Replacing s2 with ev-200 - riptyler - 07-03-16 05:44 PM

RE: Replacing s2 with ev-200 - Chuck - Raymarine - Moderator - 07-05-16, 09:42 AM

User(s) browsing this thread: 1 Guest(s)