AIS 650 with Plotter E80
|
03-09-18, 12:29 PM
Post: #12
|
|||
|
|||
RE: AIS 650 with Plotter E80
Hello Chuck,
I have a similar problem/question Devices: 2x E80 classic plotters (charttable and outside, connected to eachother by ST highspeed) Raymarine vhf dsc Ray 54e Raymarine gps antenna Autopilot st 6001(i think this model) Radar Raymarine I would like to add a Ais transponder. (thirdparty: watcheye (gps included)) The 0183 port on both E80's are already used (charttable E80: for VHF and GPS antenna, E80 at helm: no idea what is hooked up here) Can i just simply put the ais transponder in between the radio and E80? I will have to change Baudrate of the nmea 0183 port to 38400. How will the plotter talk to the ray 54e vhf? (you should be able to call a mmsi/ais directly from E80 screen i think?) |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
AIS 650 with Plotter E80 - Fedekat - 06-30-16, 04:18 PM
RE: AIS 650 with Plotter E80 - Chuck - Raymarine - Moderator - 07-01-16, 09:04 AM
RE: AIS 650 with Plotter E80 - Fedekat - 07-05-16, 09:59 AM
RE: AIS 650 with Plotter E80 - TimDV - 03-09-18 12:29 PM
RE: AIS 650 with Plotter E80 - Chuck - Raymarine - Moderator - 07-05-16, 01:07 PM
RE: AIS 650 with Plotter E80 - Fedekat - 07-06-16, 10:42 AM
RE: AIS 650 with Plotter E80 - Chuck - Raymarine - Moderator - 07-06-16, 01:37 PM
RE: AIS 650 with Plotter E80 - Fedekat - 07-07-16, 07:49 PM
RE: AIS 650 with Plotter E80 - Chuck - Raymarine - Moderator - 07-08-16, 07:57 AM
RE: AIS 650 with Plotter E80 - Fedekat - 07-11-16, 12:27 PM
RE: AIS 650 with Plotter E80 - Fedekat - 07-13-16, 09:45 PM
RE: AIS 650 with Plotter E80 - Mark - Raymarine - Moderator - 07-15-16, 03:27 PM
|
User(s) browsing this thread: 2 Guest(s)