The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / ST6000+ / S100 Compatibility

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ST6000+ / S100 Compatibility
07-21-16, 07:58 PM
Post: #1
Starfish Marine Offline
Junior Member
**
 		Posts: 2
Joined: Jul 2016
Reputation: 0
ST6000+ / S100 Compatibility
I have a customer that wishes to add autopilot remote control to his older suite of electronics. He has both an ST6000+ and a ST7000 control head for the autopilot. Based upon the forum post http://forum.raymarine.com/showthread.ph...light=s100 we thought we'd go ahead and try it. After installation the S100 can change modes between auto and standby, but can not change course. Any thoughts?

If it really isn't compatible with the ST6000+, can simply swapping out the ST6000+ with a newer display head provide compatibility, and if so, which one(s) are recommended? I've got no idea which course computer he has as I didn't have time to search the boat looking for it, but if it is part of the issue I, or he, can locate it and determine which one it is.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
ST6000+ / S100 Compatibility - Starfish Marine - 07-21-16 07:58 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication