Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
CP 200 settings and use
08-10-16, 12:57 PM (This post was last modified: 08-10-16 12:59 PM by Chuck - Raymarine - Moderator.)
Post: #8
RE: CP 200 settings and use
ubettcha,

Your system appears to be functioning in a manner which is similar to my own. Conical and DownVision sonar reach out in all directions, most notably forward in this case, 30 degrees from vertical. In contrast, SideVision produces an image from very thin fore/aft sonar return, with the primary sonar energy being transmitted perpendicular to the boat's centerline. As such, it is certainly possible to have conical and DownVision sonar detect targets before SideVision will detect them ... depth of water and speed of the vessel will be variables in determining the delay which may be experienced.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
CP 200 settings and use - ubettcha - 07-26-16, 12:42 PM
RE: CP 200 settings and use - ubettcha - 07-29-16, 12:18 PM
RE: CP 200 settings and use - ubettcha - 07-29-16, 07:35 PM
RE: CP 200 settings and use - ubettcha - 08-09-16, 04:19 PM
RE: CP 200 settings and use - Chuck - Raymarine - Moderator - 08-10-16 12:57 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)