The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Interface ES128 to Robertson AP via NMEA 0183
08-05-16, 11:55 AM
Post: #1
Interface ES128 to Robertson AP via NMEA 0183
I have a Robertson AP200DL autopilot manufactured around 1988 on my boat. This season I upgraded to an ES128 MFD along with radar and sonar.

The Robertson has a 2 wire NAV receiver connection, and supports NMEA 0183 XTE-mode, @ 4800
Messages APB, APA, XTE, RMB or XTR

I have connected:
The Yellow wire on the Robertson “NAV IN” to Yellow (positive) on ES128.
The Green wire on the Robertson “NAV RET” to Brown (Neg.) on ES128.
I believe this is correct to have the ES128 talking out port 1, and the Robertson listening.

What must I do on the ES128 to actually send messages out of port 1 at 4800 to the autopilot?

Thanks, Richard
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Interface ES128 to Robertson AP via NMEA 0183 - Qsilverrdc - 08-05-16 11:55 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)