Raymarine forum / Raymarine Forums / AIS v / [CA] MFD-VHF DCS-GPS-SHS-AIS Diagram

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] MFD-VHF DCS-GPS-SHS-AIS Diagram
01-03-18, 08:43 AM
Post: #7
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] MFD-VHF DCS-GPS-SHS-AIS Diagram
O1dSoldier,

When used in the manner which you are using SHS, it is recommended that the SHS be powered via the SeaTalk bus rather than via its power terminals. Accordingly, it is recommended that the power and ground leads be disconnected from the SHS and instead be connected to the power and ground leads of them the SeaTalk bus.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA] MFD-VHF DCS-GPS-SHS-AIS Diagram - Chuck - Raymarine - Moderator - 01-03-18 08:43 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication