Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
EV1 FAILING
08-22-16, 03:33 PM (This post was last modified: 08-22-16 04:11 PM by Chuck - Raymarine - Moderator.)
Post: #7
RE: EV1 FAILING
Chuck
AIS first
I have a RAY70 feeding AIS, it is linked up to everything else on the Raymarine NMEA2000 system, i have no 0183 connections to my radio nor to the E120. I rely on the STNG converter to connect in the E120. I guess you are saying that with my system i cannot get AIS contacts on the MFD?

For the EV1, i have now updated alley software on every box to the most current standard , i have to admit that i had fallen behind with that duty.
I took the boat out for a trial, did about 4 full circles to eventually get the deviation sorted out, which was less than 9 degrees. The variation, i am not so sure about, it only lets me select slaved, there is an option for 19W but its not selectable and any way, in My area variation is 16W.
The systems looking better but until i get out for a proper sail next weekend cannot be sure. I will get back to you on this one.
Thanks
Ian
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
EV1 FAILING - ifmdlvey - 08-17-16, 12:01 PM
RE: EV1 FAILING - ifmdlvey - 08-19-16, 03:52 PM
RE: EV1 FAILING - ifmdlvey - 08-22-16 03:33 PM
RE: EV1 FAILING - ifmdlvey - 08-24-16, 08:10 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)