Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Resetting / Removing the OEM / User splash screen of an a/c/e/eS/gS-Series MFD
08-23-16, 01:27 PM (This post was last modified: 01-10-17 04:47 PM by Chuck - Raymarine - Moderator.)
Post: #1
Resetting / Removing the OEM / User splash screen of an a/c/e/eS/gS-Series MFD
Resetting / Removing OEM / User Splash Screen

In line with using Lighthouse Version 6 (or above) software, Raymarine provided an option of adding an OEM / User splash screen to the power-on sequence for the a, c, e, eS, and gS Series Multifunction display products. The uploaded OEM splash screen will be viewed after the initial power-on Raymarine splash screen. Should one desire to reset / remove the OEM / User splash screen to permit the original Raymarine splash screen to be displayed, then:
1) copy the rayatom.upgrade.08.sh and rayatom.upgrade.08.sh.sig files attached to this thread to the root level directory of a microSD memory card having a capacity of no more than 32GB.
2) power the MFD OFF
3) insert the microSD memory card created in step #1 into the MFD's memory card reader
4) power the MFD ON and then permit it to complete initialization
5) eject the microSD memory card (HOME->SET-UP->MY DATA->EJECT CARD) created in step #1

RAYFAQ#


Attached File(s)
.sh  rayatom.upgrade.08.sh (Size: 493 bytes / Downloads: 563)
.sig  rayatom.upgrade.08.sh.sig (Size: 65 bytes / Downloads: 466)
Find all posts by this user
Thread Closed 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)