Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Seatalk Fail / SmartPilot
09-14-16, 08:56 AM (This post was last modified: 09-14-16 12:20 PM by Chuck - Raymarine - Moderator.)
Post: #6
RE: Seatalk Fail / SmartPilot
tondelayo_29,

Testing the course computer's fluxgate terminals in the manner which has been suggested is not valid and as such, has not been included within the fluxgate transducer test. The voltage across the red and green terminals should be approximately 5V and the voltage measured on the other terminals will vary with the sensing of the fluxgate. Accordingly, a voltage cannot be specified for the blue terminal. That said, it is highly unlikely that a damaged fluxgate cable would result in a SeaTalk failure.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Seatalk Fail / SmartPilot - Chuck - Raymarine - Moderator - 09-14-16 08:56 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)